Parts

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles

Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel

Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps

- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions ask - Model: EXA+ - Interface: P3 Connect - Shell: English - For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"

- Lower slider replacement parts for E-13 chainguides

- Service parts for E-13 chainguides

The HELIX R Cassette is an upgrade to any SRAM™ Eagle™ or Shimano™ drivetrain, with more range than other cassettes on the market. The 9 tooth cog lets you step down one chainring size while keeping the same top end gearing and provides not only better ground clearance, but an overall lighter drivetrain. - 1 aluminum cogs, 10 steel cogs - Designed for use with XD™ and XDR™ drivers only

Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design. A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves. - Save weight, keep your drivetrain options open, and use the chain you want - 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks - Cut from billet AL-7075 for the highest strength and wear resistance - SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible - Extensive CNC machining for lightweight and looks that kill - Available in 5 bold Ano colors and 4 sizes 28/30/32/34t - Match and personalize the way you want? - E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile

Customize your ride with The Helix Race Direct Mount Chainring. Made from ultra-lightweight and durable AL-7075-T6, this chainring offers compatibility with SRAM™/Shimano™ chains and features a flip-flop design for chain line adjustment. With bold color options that match e*thirteen's popular components, it's the perfect addition to your dream rig, ensuring maximum strength and longevity. - E*thirteen QuickConnect Direct Mount rings include 1mm spacers, which allows them to be run on legacy cranks (TRS/LG1/XCX), as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile is compatible with both Shimano and SRAM chains in both 11 and 12-speed - Can be flipped to provide either a 52 or 55mm chainline

The e*thriteen Helix Race 12-speed 9-52t cassette is engineered to deliver precision shifting performance with an industry leading 578% gear range. The proprietary 9 tooth smallest cog combined with the 52t largest cog enables the use of a smaller chainring for improved clearance, lighter system weight and a lower bail out gear ratio without high gear compromise. - Seamless cross-compatibility with Shimano, SRAM, and TRP 12-speed drivetrains - Patented 2-Part design provides strength, stiffness, light weight, and ease of service - Aluminum and steel clusters can be replaced separately to reduce service cost - 9 tooth high gear allows use of smaller chainrings for clearance and weight savings - Fits XD™ and XDR™ Drivers Only (Hope XD drivers are undersized at the clamp location and require a Cassette Shim Kit -Sold Separately) - Tested extensively for analog and e-bike use

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - 511% range is great for modern 1x drivetrains - 10 steel cogs, plus 1 aluminum cog increase durability - Saves weight by using smaller chainrings and shorter chains, which also provides better ground clearance - Designed for use with eBike drivetrains - Compatible with Shimano and SRAM drivetrains - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-17-20-24-28-33-39-46 - Drivetrain Speeds: 11 - Color: Black - Weight: 390 g

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 4

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Dura-Ace 9000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Dura-Ace 9100 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 8000 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings

absoluteBLACK GRAPHENpads® are a completely new benchmark for the braking pad industry thanks to their unique approach to the design of backplate cooling fins, bespoke backplate coating with graphene as well as a completely new friction compound, which uses specially modified graphene instead of toxic copper. - Specially modified graphene in the friction compound greatly improves braking performance, durability and heat transfer to the backplate - Backplates are entirely covered in graphene heat dissipating coating to achieve much greater heat transfer from the friction material to the cooling fins and at the same time - Patented angled radiator fins for superior airflow and cooling - Provide predictability, power, better modulation and faster stopping - Extraordinarily quiet even during long descends - Compatible with Shimano Models: Deore BR-MT410, BR-M575, BR-M525, BR-M515, BR-T615 / LX BR-T675 / Alivio BR-M4050 / Acera BR-M3050 / Altus BR-M375,BR-M365,BR-M315, BR-M506, BR-M505, BR-MT500, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M415, BR-MT400, BR-M395, BR-M355, BR-M200 ; TRP: Hylex, HY/RD / Spyre SLC, Spyre / Spyke / Dash Sport ; Tektro: Orion SL HD-M740, Orion HD-M730,HD-M725 / Gemini SL HD-M520, M521 / Gemini HD-M500, M501, HD-M510 / Draco2 HD-M352, HDC330 HD-M330 / Auriga HD-M290, M291, HD-T530, HD-T525, HD-E530, HD-E525 / Aquila MD-M500 / Aries MD-M300 / Mira MD-C400 / Volans HD-T710 / Vela HD-T290 / Dorado HD-E715, HD-R280, MD-M280, HD-M282, HD-M285, 286, HD-T285, T286

The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug